. Lamination adhesive, use when adhesives is wet

Fast Tack Water Based Adhesive is a high performance water-based, one part adhesive formulated for fast bonding and long term heat resistant bonds. Adheres to many types of flexible foam, latex foams, fabric, polyester fiberfill, wood, plywood, particleboard and many plastic and metal surfaces.

• Fast bonding. Depending on substrates, handling strength bonds can be made without complete drying.
• Repositionable while adhesive is wet and aggressively tacky.
• Long term stable bonds. Good heat resistance.
• Bonds most foamed plastics, plastic laminates, wood, plywood and canvas to themselves and to each other. Performs
best when at least one substrate is porous.
• Non-flammable in the wet state.
• Contains no polychloroprene.

Water Based Adhesive is intended for use in a wide variety of applications. Coverage and application procedure will vary for each use. User should test for suitability with their process and performance requirements.
In general, key considerations when using Fast Tack Water Based Adhesive are:
• Ensure adequate adhesive is applied over the entire area to be bonded. This may mean an additional coating is required.
• Bonds should be made when the adhesive feels aggressively tacky.
• Apply sufficient pressure to ensure good contact between the surfaces. See Application Tips & Tricks Pamphlet for more information.