Comelz CZ Serie: The most complete solution to meet the wide variety needs of cut

The new CZ series represents the evolution of the winning original concept: an high production cutting island, with a tilted work area that is highly ergonomic and integrated with an extended cutting area, but always directly under the control of the operator.

The TUV certification obtained for our machines is a further guarantee of the highest safety standards.

FLEXIBILITY WITH SIZES

A deeper tilted work area allows for handling the hides in large portions, or even entire hides if the area is wide enough. This is the reason why, depending on the hides, everybody can choose the correct width of the conveyor belt among sizes M, L and XL, respectively 1.6, 2.0, 2.4 meter.

Compact multi-tools heads

Entirely developed, produced and integrated by Comelz, the tools are fast, robust, and reliable. In addition the tools are lightweight and compact improving the mechanical rigidity and
allowing for quick and easy access to tool changing due to head rotation.

CUP HEAD SERIES
Evolution of the CU series with pneumatic oscillator available in 3 oscillation strokes of 2, 4 or 8 mm suitable for cutting materials
up to 4.5 mm.

The punching is managed by a maximum of 5 rotating punches mounted on revolver units and the equipment is completed by a pen to mark with interchangeable refill

TM HEAD SERIES
Head with pneumatic oscillator available in 3 oscillation strokes of 2, 4 or 8 mm suitable for cutting materials up to 18 mm even
in multi-layered configuration.

2 rotating punches and 2 fixed punches as well as a plate which can be activated by software in cases where it is necessary to improve the retention of the materials during the punching step.

STOP&GO FOR CUTTING CORNERS
The Stop&Go patented system, available in the pneumatic Comelz oscillators, speeds up the execution of fragmented corners because it allows the blade to place in vertical controlled position during every oscillation, in order to get in and out the
material during the cutting of corners without moving the head vertically, which is slower

LASER PROJECTORS AND ANTI-REFLECTION LIGHTS

The integrated laser projectors always guarantee complete and optimum visibility of the piece shapes to be nested for every type and colour of material. The large work area is illuminated by a system of LED lamps.

POWER FULL AUTONESTING ENGINE

Algorithm resulting from years of experience in automatic cutting optimization of both synthetic and natural materials. Fully configurable, it offers parameters such as cutting direction, quality areas, pairs and much more, to be taken into account for a constant yield over time. The data are used in the cutting phase to optimize consumption

MICRO-SECTOR VACUUM SYSTEM

A sophisticated vacuum system controls a large number of independent micro-sectors, each of just 10 x 14 cm. This concentrate with great resolution the vacuum power only where necessary, considerably reducing vacuum leaks along the irregular outline of the leather.

ASSISTED PICK (Optional)

With a touch screen and a dedicated software you can easily identify parts with different size of parts of different articles, send back into the bill of order parts that were potentially damaged, but also control the cutting machine parameters (knife hight, speed, etc.) directly from the collection position. With the aid of high quality LCD projectors, the collection assistance system can be integrated. By projecting different colors on different pieces of measurement, or pieces of different items in the same area to optimize the yield of the material, it is easier to identify and speed up the collection

Technical data